The temp and gauge does work, but it also doesn't move during the sweep test, and the fuel gauge, "sticks" at the 1/2 mark both during the sweep test AND when driving normally. With those results, I'm not sure what to think, especially with the tach and fuel gauges. Also, this test process seems to work for my '04 (ZX3) but not for my '01. Tested: 2016 Ford Focus RS. More than just drift mode. The 2016 Ford Focus RS is a car so special and so emotionally rewarding that it needs no rational justification. But just in case you need Software. Download the software here–> FO RScan. So if you want to program, you need a license. This can be applied for free for 2 months to test the program. Then select a license that is desired depending on the duration. How to apply for the (free) license is described in detail in the forum. Hey guys, just a quick video explaining how to access the test menu diagnostic screen found on many Ford models, on a 2012-2014 Ford Focus with LCD screen. Without its optional side airbags, the Focus received a Poor in the IIHS side-crash test, so you'll want to avoid models without them. After the model year 2008 revision, handling isn't as crisp Prepare the vehicle for test as directed. - Start and idle the engine. - Make sure engine coolant temperature is 83°C (180°F) before proceeding. Page 46 Additional Tests SYSTEM/ACTUATOR TESTS The screen shows the Injector Kill Results, the Injector Number selected, the current Engine Speed, and the Engine Coolant Temp. IAT V PID reading less than 0.2 volts with key ON and engine OFF or during any engine operating mode indicates a hard fault. P0113 – Intake Air Temperature (IAT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The IAT sensor maximum is 4.6 volts or-50°C (-58°F). Open circuit in harness Sensor signal short The SELECT/RESET button must be released within 3 seconds of TEST being displayed to ensure the Self-Diagnostic test mode can be continued. To scroll through the test mode data press the SELECT/RESET button once to advance each step through the data, eventually DTC data will be displayed, DTC should show 0 if no faults have been logged Vay Tiền Trả Góp Theo Tháng Chỉ Cần Cmnd.

ford focus test mode list